Someone within 24 hours purchased Carbon Fiber Intercooler Pipes - For Side Mount Intercooler SW20 3SGTE MR2
Someone within 24 hours purchased Reproduction JDM Front Solid Side Moldings (Front Side Marker Deletes)
Someone within 24 hours purchased Engine Lid Dual Fan Shroud (Mirror Finish/Carbon Fiber/Raw Aluminum)
Someone within 24 hours purchased MR2Heaven GEN 2/3/4/5 3SGTE "ONE PIECE" ALUMINUM INTERCOOLER PIPES
Someone within 24 hours purchased Reproduction OEM Leather/Microfiber Suede T-Top Glass Protective Bags
Someone within 24 hours purchased Roll Center Adjusters (Camber, bumpsteer and roll center correction)
Someone within 24 hours purchased MR2Heaven Weighted Leather Wrapped 98 OEM JDM MR2 Style Shift Knob
Someone within 24 hours purchased SW20 MR2 Front Big Brake Kit Bracket (For Wilwood Forged Superlite Caliper & 13" Larger Brake Rotor)
Someone within 24 hours purchased 3 Point Front Strut Tower Brace W/ Optional Brake Master Reinforcement
Someone within 24 hours purchased HOLY GRAIL Full Throttle Cable, CRUISE CONTROL COMPATIBLE - Direct Fit FOR GEN2/3/4/5 (See Notes)
Someone within 24 hours purchased "Wire Tuck Friendly" HOLY GRAIL Full Throttle Cable, Direct Fit FOR GEN4 3SGTE, 5SFE, BEAMS, TMIC setups
Mad PSI Carbon Fiber Front Lip
One of a kind and in stock.
Limited quantities in stock, only made in batches. (Once they're gone, theyre gone!)
We are the ONLY authorized distributors in the world for this brand.
The MadPSI Front Lip is a lightweight aero-piece that attaches to the bottom of your OEM front bumper to enhance the looks and aerodynamics of your MR2.
At higher speeds the MR2 tends to feel “floaty.” Realizing this, in 1993 Toyota included a lower lip from the factory to help get rid of this floaty feel. The solution actually provided a noticeable difference. The same is true of the MadPSI carbon fiber Front Lip. 1991 and 1992 MR2s will especially benefit from better stability at higher speeds since they do not come lower lips stock.
The MadPSI carbon fiber Front Lip is extremely lightweight. Despite it being as wide as an MR2, 63.25″x18.60″x3.00″ to be exact, it weighs only 1.4 lbs. To put that into context, that is lighter than an Apple iPad. Yet, it still maintains high stiffness and high tensile strength due to its carbon fiber material.
Many composite parts are not smooth. When you look at them at an angle, you see waviness and bumps. When you run your hand across the surface, you feel a rough texture. When you look closely, you may even see small pinholes. To ensure the MadPSI carbon fiber Front Lip has an amazing finish, we implemented special techniques, protected by trade secret, throughout the product development and manufacturing process. Was it more expensive? Yes. Was it worth it? Absolutely. The finish is as smooth as glass. When you run your hand across the surface, it glides effortlessly. Combined with our highest-grade glossy clear coat, it has a stunning mirror-like finish.
Many composite parts have distorted weave patterns, especially on complex surfaces. The weave pattern looks like an absolute mess when there is a concave shape, drop, or curve. Some manufacturers even paint over sections of products to hide areas where weave distortion is obvious. To ensure the MadPSI carbon fiber Front Lip has a straight weave pattern, we use the best manufacturing facility with the best production team. These highly skilled workers are true artisans with over 15 year of experience. Is doing this more expensive? Yes. Is it worth it? Absolutely. The result is a beautiful straight weave unmatched in the industry. We take great pride in our straight weave pattern and instead of painting over it, we proudly display it like artwork in high-resolution close-up photographs.
Many manufacturers use excess leftover carbon sheets from other parts in order to save money on material costs. The result is a visible line where one carbon sheet ends and another starts and a visible misalignment of the weave pattern where the different carbon sheets meet. To ensure the MadPSI carbon fiber Front Lip has the most consistent weave pattern, we construct every carbon fiber Front Lip using a one-piece carbon sheet. We dispose of any excess material. Is doing this more expensive? Yes. Is it worth it? Absolutely. The result is a consistent weave pattern throughout the entire carbon fiber Front Lip with no visible cuts or disjointed lines.
MadPSI uses only the highest-grade carbon fiber raw material in all its products. We use the same materials used in aviation, battleships, satellites, and rockets.
people are currently looking at this product
Guaranteed Safe Checkout