GEN2 3SGTE Parts (28)

Purpose Another NEW product offering from MR2Heaven. Continuing where Toyota left behind and improving on the part itself.  By putting our touch, redesigning and improving on the OEM cables, this cable is often referred to as "The Holy Grail" of all throttle cables. This BRAND NEW cable will solve all your problems!  Ever since throttle cables have been discontinued by Toyota, many users have been struggling to find solutions. Frustrated about overly stiff, vague, unresponsive or wobbly/loose gas pedal response? Want to replace a frayed and worn throttle cable?  Trying to clean up the engine bay? Want to KEEP or DELETE cruise control?  Looking to upgrade to a GEN3/4/5 3SGTE and need a throttle cable? Looking for the discontinued unicorn NA-Non Cruise Control Throttle Cable? This cable will also work with a Straight runner intake manifold/trunk mount intercooler setup Custom setup? We have got you covered. Features OEM fit and finish - All related rubber grommets, metal bracket pieces and protection sleeves included (Everything in the first picture) Drop in plug-and-play throttle cable (No need to modify anything unless you're on a gen3, then you'll need to modify  Longer than the original NA throttle cable - (for those people demanding wire tucks, straight runner intake manifolds/trunk mount IC and other purposes) 20% longer length on threaded part of the cable to allow for more adjustments - to achieve that perfect gas pedal feel and throttle response!   We eliminated all the headaches and confusion for the customer, simply remove your current throttle cables and hook up this new one! If you have or want to keep cruise control, there is an additional cable you may or want to order. Refer to notes Check out our other cables - We offer many other cables for different purposes! If you have any questions about our cables, feel free to reach out to us and we can help you out! Notes Cruise Control - There are 2 throttle cables to make Cruise Control work. The long full cable which is the page you are currently on and one of the short cables below. Ideally best to replace both at the same time for the best experience. GEN2/3 3SGTE - https://mr2heaven.com/products/mr2heaven-gen-2-3-cruise-control-throttle-body-cable GEN4 3SGTE, NA 5SFE, 3SGE, BEAMS - https://mr2heaven.com/products/mr2heaven-na-5sfe-gen4-3sgte-cruise-control-box-to-throttle-body-throttle-cable GEN5 3SGTE - https://mr2heaven.com/products/mr2heaven-gen-5-cruise-control-throttle-body-cable Regarding GEN3 3SGTE Only - For MR2Heaven as well as OEM cables, If using for GEN3 3SGTE, you would need to modify your OEM throttle cable mounting bracket by offsetting its mounting location by half an inch or create your own mounting bracket. (This is standard procedure for GEN3 3SGTE Swaps). Wire tuck friendly. Great for GEN4 3SGTE or trunk mounted throttle body setups For AW11, a few of our customers tested on MK1A/B with 4AGE throttle body and MK1.5 (AW11 with a 3SGTE) so far. They reported they potentially needed to use an additional throttle cable stopper (found here) and had to snip off about 1/2" of inner cable for MK1A/B setup. For MK1.5, it is plug and play. We personally never owned or tested on an AW11 but our customers are pretty creative :) For RHD, will need to modify bracket by drilling one hole 

Connects from the cruise control junction box to your GEN2 / GEN3 throttlebody butterfly. Offers 20% more threaded adjustment over the factory cable. Allows for more adjustments over stock OE cable.  Check out our other cables - We offer many other cables for different purposes!

What is the Purpose? Toyota left out many potential performance benefits while designing the MR2. The blow off valve was added on the MR2 for the sake of comfort and to decrease noise, vibration and harshness (NVH) as a compromise against performance. To achieve better performance, the removal of the blow off valve is performed and our stylish blow off valve block off plug is used to make a perfect seal. This allows for Faster spool and better throttle response while still retaining the blow off valve sound.    Proven safe by many members as well as from other OEM toyota turbocharged applications with over 250k miles on original turbo/motor. Features: Billet CNC 6061 Aluminum blow off valve block off plate. Mirror polished Included: 1x Mirror polished Aluminum Block off plate O Rings Hardware Optional plug to block off rubber turbo "S" shaped rubber hose Options: Plug to cap off the rubber turbo "S" shaped rubber hose (turbo inlet side, before the Air flow meter) where the OEM re circulation pipe goes  

This 6061 BIllet CNC Aluminum adaptor allows one to attach a 3" intake filter to the Air flow meter on a GEN2 3SGTE for MORE HORSEPOWER! Comes anodized silver for protection against the elements

Purpose The OEM Rubber intake boot (Turbocharger to Air Flow Meter) is notoriously known for cracking, causing all sorts of hesitation issues for the 91-95 USDM MR2 Turbos. Many of these issues include hesitation, bogging, running rich or lean as well as knocking as the car cannot properly calculate air flow going into the motor.  Our solution? We made our own "S-Pipe" with silicone. Silicone is known for quality, durability, reliability and is great at handling high temperatures, exactly what the OEM Rubber boot does not do too well. MR2Heaven Silicone Hoses utilize a 4 ply high temperature material. Silicone hoses are used by professionals in performance racing vehicles, commercial truck and buses, marine etc.  Features Optional S-Tube Blow off Valve Re-circulation plug (For those running blow off valves that vent to atmosphere 4 Ply Construction Available in Red or Black    

The OEM Intercooler "Hot Pipe" Hose (Turbocharger "Hot pipe" to intercooler) is notoriously known for to be missing, cracking, damaged or altered, causing all sorts of hesitation issues for the 91-95 USDM MR2 Turbos. Many of these issues include hesitation, bogging, running rich or lean as well as knocking as the car cannot properly calculate air flow going into the motor.  Our solution? We made our own with silicone. Silicone is known for quality, durability, reliability and is great at handling high temperatures, exactly what the OEM Rubber boot does not do too well. MR2Heaven Silicone Hoses utilize a 4 ply high temperature material. Silicone hoses are used by professionals in performance racing vehicles, commercial truck and buses, marine etc.  Features: 4 Ply Construction Available in Red or Black  

The OEM Intercooler Hoses is notoriously known for to be missing, cracking, damaged or altered, causing all sorts of hesitation issues for the 91-95 USDM MR2 Turbos. Many of these issues include hesitation, bogging, running rich or lean as well as knocking as the car cannot properly calculate air flow going into the motor.  Our solution? We made our own with silicone. Silicone is known for quality, durability, reliability and is great at handling high temperatures, exactly what the OEM Rubber boot does not do too well. MR2Heaven Silicone Hoses utilize a 4 ply high temperature material. Silicone hoses are used by professionals in performance racing vehicles, commercial truck and buses, marine etc.  Features 4 Ply Construction Available in Red or Black Includes 1x Hot Pipe to Intercooler Hose 1x Hot pipe to Turbo Hose 1x Cold pipe to Intercooler Hose 1x Cold pipe to Throttle Body Hose (Please specify GEN2 or GEN3 3SGTE)  

The OEM Rubber blow off valve recirculation hose is notoriously known for cracking, causing all sorts of hesitation issues for the 91-95 USDM MR2 Turbos. Many of these issues include hesitation, bogging, running rich or lean as well as knocking as the car cannot properly calculate air flow going into the motor.  Our solution? We made our own with silicone. Silicone is known for quality, durability, reliability and is great at handling high temperatures, exactly what the OEM Rubber hose does not do too well. MR2Heaven Silicone Hoses utilize high temperature materials. Silicone hoses are used by professionals in performance racing vehicles, commercial truck and buses, marine etc.  Features: Direct Fit 1" to 1" Straight Hose Coupler 2.25" Length 0.175" Thickness 3 Ply Construction Available in Red or Black    

Fits 91-98 MR2s. 3SGTE or 5SFE  With each mount coming with a lifetime warranty, you know they make a good product and stand behind it. Innovative offers different stiffness bushings which means you can choose your mount's stiffness to accommodate your driving conditions and power level. Designed by CAD. Stress analyzed Reduces unwanted motor movement.  Reduces wheel hop and increases driving feel.  Bushing Durometers Available: 60A: Recommended for street use and stock to mild motors. Red Urethane. 75A: Recommended for occasional track use, and strong motors. Black Urethane. 85A: Recommended for race use and fully built motors. Gray Urethane. 95A: Recommended for extreme race use and very high HP only. Red Urethane. *Please note: Innovative builds these to order and typically takes around 2 weeks to complete and ship

Billet CNC 6061 Aluminum distributor cover cap to go along with a COP install.  Comes Mirror polished 

OEM Toyota spark plugs for the 3SGTE   Sold individually (1) spark plug. If you need 4, please order 4.

Product Description: Fidanza Adjustable Cam Gears are made from the highest quality 6061 T6 aluminum. They are CNC machined to more exacting tolerances than original gears. The tooth edges are beveled to increase belt life. With twelve degrees (both advance and retard) of laser etched adjustments, you can be assured of proper and precise tuning. The inner ring of the cam gear is designed for strength, function, and precision. Stainless steel studs are threaded through the backside of the outer gear. The inner gear is then fastened with stainless steel nuts and lockwashers. This enables an increase in the amount of torque used to tighten the fasteners, with no risk of stretching to the aluminum threads. All chain drive gears have a 1050 steel outer sprocket. All belt drive cam gears are made from 6061 T6 aluminum. All Fidanza Cam Gears are sold PER CAM GEAR. If you need one for each cam Please order ‘Quantity 2’   Now only available in silver Fits all 3SGTE engines

  This 6061 Billet CNC Aluminum adaptor is a complete kit that allows one to run the standard 91-95 GEN2 3SGTE Waterneck on a GEN3/4/5 3SGTE.  Comes polished to a mirror-like shine for great looks and sealing  

Moroso Oil Pan for Gen2 3SGTE 20935 Product Description  Whether you drag, oval or road race, Moroso has the Oil Pan your engine needs specially designed for front or rear wheel drive sport compacts. Each pan is fully fabricated from aluminum or steel, with race proven features that control oil for maximum power. The key is to keep the crankshaft free of excess oil which allows the engine to spin freely and achieve its full power potential. Moroso Oil Pans are offered in Wet or Dry Sump. The use of a wet or dry sump oiling system is often determined by the level of competition and the racer’s budget. A wet sump system is based on the original equipment oiling system, and can be enhanced with certain components to improve oil control and increase power. A dry sump system is designed for the top levels of racing where maximum power and oil control are absolutely essential. Check out all the special features listed with Moroso Oil Pans.   Oil PanKicked-Out SumpWet SumpSide of pan retains a 3/8" thick billet receptacle to accommodate the factory oil level sensorFront of pan Incl a 28mm threaded bung to accommodate the factory turbo drain back connection   Product Specifications Capacity 6.25 Quart Depth 7-9/16" Material Aluminum   All Fitments TOYOTA Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes 1988 - 1993 CELICA ALL TRAC L4 2.0 T 3SGTE GAS 1990 - 1999 CELICA GT L4 2.2 N 5SFE ALL 1991 - 1995 MR2 ALL ALL ALL ALL ALL ALL

What is the purpose? This plug inserts into the rubber/silicone Air intake hose when one decides to delete their blow off valve or set their blow off valve to non-circulating mode (Vent to atmosphere)  Without a plug in the intake pipe, the ECU would not run properly as it will miscalculate the amount of air entering the motor.    Features 6061 Aluminum Billet CNC construction Anodized for protection against weather elements and scratches Integrated bead to ensure tightness and a tight seal No hose clamp needed   Included 1 Billet Aluminum 6061 CNC`ed Plug   Notes: If you need the blow off valve block off plate, https://mr2heaven.com/products/3sgte-blow-off-valve-block-off-plate If you want to replace your rubber hose for a silicone hose,  https://mr2heaven.com/collections/mr2heaven-products/products/mr2heaven-silicone-s-tube-intake-piping-for-gen2-3sgte