-15% sale
Dry Carbon Fiber Gauge Cluster Overlay Dry Carbon Fiber Gauge Cluster Overlay
Collaboration Dry Carbon Fiber Gauge Cluster Overlay
$59.99
$69.99

Dry Carbon Gauge Cluster Overlays Held by adhesive spray or optional 3M tape RHD and LHD Support Toms sticker is NOT included Collaboration item and made by Gavin from United Kingdom Note: This is not actual carbon fiber overlay nor a vinyl sticker, but dry carbon effect/imitation plastic hybrid.  The design has been made as best as possible from a direct copy but some slight adjustment needed for best results.  “It's a faithful copy on a budget but if you take time then the results speak for themselves”

JDM Reproduction MR2 Dandism - Midship Specialty Decals JDM Reproduction MR2 Dandism - Midship Specialty Decals
Collaboration JDM Reproduction MR2 Dandism - Midship Specialty Decals
from $24.99

Reproduction of the famous JDM Man in Dandism, Midship Specialty decals.  Has a pretty cool retro look and style to it Available as Set of 2 for T-Top glass or rear window 1x Large Rear Decal Or all 3!

Reproduction Autopista MR2 Rear Panel Add on (for 1991-1993 Tail Light Setup) Reproduction Autopista MR2 Rear Panel Add on (for 1991-1993 Tail Light Setup)
Collaboration Reproduction Autopista MR2 Rear Panel Add on (for 1991-1993 Tail Light Setup)
$199.99

Purpose Reproduction of the famous discontinued Autopista centre panel overlay, developed and produced by Gavin from the United Kingdom. Due to popular demand for the Autopista centre panel, a faithful reproduction of the original red panel has been professionally remoulded to an almost exact same fitting and styling. Features The new reproduction panels are produced from fiberglass and finished off with a strong gel coating in the colour of Toyota black 202. This has produced an exceptional high standard gloss finish. The panel can easily be repainted to the color of your car, however black matches great with most common MR2 colors.  The fitting of the panel is the same as the original Autopista panel. The panel comes with fitted double sided 3m tape which is extremely strong. Simply peel the film from the tape which is attached to the new panel and apply to your existing rev 1-2 single lined centre panel with equal pressure. Guidance/Installation Instructions It is advisable to remove your existing centre panel from the car and wash down and clean any dirt or grease and leave to dry. This will allow for the best attachment of the sticky tape to the panel. Ensure the Autopista trim is placed symmetrically and covers the whole area of the original factory panel. This shall allow for the panel to fit correctly and for the boot to close properly when it is fully installed. When applying the panel back into the car, make sure all four screws are fully attached from the inside of the boot using a 8mil socket and that the tail lights have been correctly fitted. It is always advisable to do a test fit before committing to the full installation. In the rare event that the panel comes away from the original panel, it is advisable to purchase further double sided tape and apply where needed The reason for using double sided tape is so that if you decide to take the Autopista panel off then you still have the original which is undamaged. Notes This only fits MR2s with 1991-1993 Tail lights/Rear Center panel installed

Reproduction JDM Reproduction JDM
Collaboration Reproduction JDM "MR2" LED Glow Emblem (Available in OEM Blue or Red)
$229.99

  A faithful reproduction of the UBER RARE OEM JDM Discontinued Toyota LED emblem option, but better :)  Collaboration item and made by Gavin from United Kingdom Features Works with 12V source already on MR2s Full working kit Available in OEM blue or soft RED Fitment Can work on any MR2, but ideally 91-98 MR2s Plug and play for 91-93 tail lights Requires drilling 2 holes or double sided tape for 94+ Kouki tail light panels  

-14% sale
Reproduction OEM Reproduction OEM
Collaboration Reproduction OEM "MR2" Rear Window Panel Add On Kit
from $129.99
$149.99

  Purpose These were on very rare select MR2s in the world and are highly desired for and discontinued. So what did we do? We partnered up with Gavin from the United Kingdom and had them professionally remade so that we could share this for the community! We first took our broken sample to a professional plastics design company. A hand cut version was made and smoothed down. From there we were able to scan a copy and rendered any imperfections out with CAD software and were then laser cut. We then took these to a professional screen print company. The art work was then replicated onto Illustrator software and the screen printing is the same as the original version with two prints, grey over white.  Features Drop in plug and play No disassembly needed To install, panel pushes right in and stays in place. Optional use of flexible mounting clips if desired  Uses OE Rear window plastic trim to install mounting clips.   Included Left and right side Rear Window Panel Add on Mounting Hardware Kit

Reproduction TOM'S MR2 Rear Panel Add on (for 1991-1993 Tail Light Setup) Reproduction TOM'S MR2 Rear Panel Add on (for 1991-1993 Tail Light Setup)
Collaboration Reproduction TOM'S MR2 Rear Panel Add on (for 1991-1993 Tail Light Setup)
$199.99

Purpose Reproduction of the famous discontinued TOM'S centre panel overlay, developed and produced by Gavin from the United Kingdom. Due to popular demand for the TOM'S centre panel, a faithful reproduction of the original red panel has been professionally remoulded to an almost exact same fitting and styling. Features The new reproduction panels are produced from fiberglass and finished off with a strong gel coating in the colour of Toyota black 202. This has produced an exceptional high standard gloss finish. The panel can easily be repainted to the color of your car, however black matches great with most common MR2 colors.  The fitting of the panel is the same as the original TOM'S panel. The panel comes with fitted double sided 3m tape which is extremely strong. Simply peel the film from the tape which is attached to the new panel and apply to your existing rev 1-2 single lined centre panel with equal pressure. Guidance/Installation Instructions It is advisable to remove your existing centre panel from the car and wash down and clean any dirt or grease and leave to dry. This will allow for the best attachment of the sticky tape to the panel. Ensure the TOM'S trim is placed symmetrically and covers the whole area of the original factory panel. This shall allow for the panel to fit correctly and for the boot to close properly when it is fully installed. When applying the panel back into the car, make sure all four screws are fully attached from the inside of the boot using a 8mil socket and that the tail lights have been correctly fitted. It is always advisable to do a test fit before committing to the full installation. In the rare event that the panel comes away from the original panel, it is advisable to purchase further double sided tape and apply where needed The reason for using double sided tape is so that if you decide to take the TOM'S panel off then you still have the original which is undamaged. Notes This only fits MR2s with 1991-1993 Tail lights/Rear Center panel installed

6

Have Questions?

Feel free to shoot us an email!

We Ship Worldwide!

Best Domestic and International Discounted Shipping Rates. We also help consolidate orders! Send us an email!

Satisfaction Guaranteed!

Don't like it? We'll make it right for you!

Most In Stock Orders Ship Within 1-48 Hours

We also offer multiple shipping speed options!